Elastic, Tapes & Cords: A Buyer’s Guide for Garment Units
Share
Elastic, tapes and cords rarely appear on a spec sheet with much detail — yet they decide how a waistband feels after fifty washes, whether a hood cord stays put, and how clean a placket looks. This guide covers the types garment units buy most, and how to spec them correctly for bulk orders.

Elastic stitched into the casing — recovery is what the wearer feels every day.
Elastic: widths and recovery matter most
Elastic is sold by width, and the width should match the garment: narrow widths (around 6–12 mm) for lingerie, sleeves and light gathers; mid widths (around 25 mm) for everyday waistbands in pyjamas, underwear and kids' wear; wider bands (around 32–38 mm) for trousers, sportswear and maternity wear where the band carries real load. Our Limitless Stretch range, for example, runs in 6, 12, 25, 32 and 38 mm for exactly these uses.
Two properties decide quality:
- Recovery — good elastic returns to its original length after stretching. Poor recovery is why waistbands go loose within months; always stretch-test a sample repeatedly before ordering.
- Heat and wash resistance — waistband elastic is stitched, ironed and washed hard. Confirm the elastic tolerates your production process, especially if it will be dyed or heat-pressed.
Tapes: the finishing backbone
- Hook & eye tapes — pre-spaced hooks and eyes on tape for waistbands, skirts and trouser tops; far faster to apply than single hooks in production.
- Measuring tapes — a production-floor essential; keep spares, as worn markings cause cutting errors.
- Binding and finishing tapes — for edge finishing and reinforcement on necklines, armholes and plackets.

Draw cords on a hoodie — cord, puller and stopper work as one set.
Cords, pullers and stoppers
Draw cords for hoodies, joggers and bags are usually bought as a set: the cord itself, the puller or aglet that finishes the end, and the stopper that locks adjustment. Order all three from the same source and spec so colours and sizes match. Flat cords sit better in wide channels (jogger waistbands); round cords suit hoods and bags. For cords under tension, check the stopper grip on your actual cord — a stopper that slips on a smooth cord is a common and avoidable failure.
Bulk-buying checklist
- Elastic: width in mm, colour, and metres per roll/bundle — plus a recovery test on a sample.
- Tapes: type, width, and spacing (for hook & eye tape) stated in the enquiry.
- Cords: flat or round, thickness, length per piece, and matching stoppers/pullers.
- State the end garment — a good supplier will flag a wrong spec before dispatch, not after.
See these ranges in our Garment Accessories collection and our Zippers & Fasteners collection.
Buying in bulk? Ashapuri Threads is a leading manufacturer & distributor of garment essentials since 1986, supplying garment manufacturers, boutiques and exporters across India. Share your requirement on WhatsApp +91 73489 27541 or through our Bulk Enquiry page for our best quotation.