Sewing Thread: How to Choose the Right Thread for Garment Production
Share
Thread is a small line on the costing sheet and a big one on the factory floor. The wrong thread breaks at the machine, puckers the seam or fades differently from the garment after washing. This guide covers the types garment units actually buy, and how to choose between them.

Every shade on the card is a production commitment — choose the range before the order.
The main thread types
Spun polyester thread is the production standard for most garments. It is strong, colour-fast, slightly elastic so seams flex with the garment, and it runs smoothly on high-speed machines. Shirts, trousers, uniforms and most stitched products run on spun polyester.
Cotton thread is chosen where a natural hand-feel matters, for garment dyeing (it dyes with the garment), and for specific traditional and quilting work. Mercerised cotton adds lustre and strength.
Embroidery thread — rayon and polyester — is about shine and colour. Rayon gives the classic high-lustre finish; polyester embroidery thread is stronger and holds colour better under washing and sunlight, which is why export units often prefer it for logos and badges.
Speciality threads cover overlocking, bag closing, candle and book-binding thread, piping thread and heavy-duty work — each wound and finished for its machine.
Thread count, in plain words
Thread thickness is described by count or ticket number. The practical rule: higher ticket number means finer thread. Fine threads suit light fabrics and fine stitching; heavier fabrics and load-bearing seams (denim, bags, upholstery) need thicker, stronger thread. The seam should never be much stronger or weaker than the fabric itself — a seam that cannot give will tear the cloth next to it.
Shade matching is a production decision
For repeat orders, thread shade consistency matters as much as strength. Serious buyers work from a shade card, note the shade number on the order, and keep a reference cone from every lot. A shade that is half a tone off is invisible in the store and obvious across a finished production run under factory light.
What to check before a bulk thread order
- Fabric and garment type — and the machine (lockstitch, overlock, embroidery)
- Thread type and ticket/count your production team runs today
- Shade numbers from the shade card, not colour names
- Cone size and metres per cone — it decides how often operators stop to change cones
- Quantity per shade, and whether the order repeats monthly
See our full sewing threads range and the Madura Coats collection. For bulk pricing, send your shades and quantities through our Bulk Enquiry page or on WhatsApp at +91 73489 27541.
Ashapuri Threads — leading manufacturer & distributor of garment essentials since 1986, Bengaluru.